From US$3300

From US$3300

Designed with the future in mind – and the past at heart.

Designed with the future in mind –
and the past at heart.

Built by Riders,
for Riders.

Built by Riders,
for Riders.

Over four years in the making...

...this is
the Mach One.

From US$3300

From US$3300

Designed with the future in mind – and the past at heart.

Built by Riders,
for Riders.

Built by Riders,
for Riders.

Over four years in the making...

...this is the Mach One.

45mph
Top Speed

30 Mile
Range

0-30 in
3 Seconds

45mph
Top Speed

30 Mile
Range

0-30 in
3 seconds

F1 derived monocoque chassis.

Like a Formula 1 car the Mach One uses a load bearing carbon fibre tub bolted directly to the suspension, saving weight and enabling tight packaging.

Hollow Kevlar composite deck.

Two Kevlar composite parts laminated with a urethane edge form the Mach One’s hollow 10” deck weighing in at just 1kg.

Swappable deck system.

The Mach One’s deck is a top cover that’s easily removed with eight screws, allowing easy access to internals. Upgrade your deck when newer models & graphics become available, or have custom setups you can swap out in an instant.

Single pivot suspension swing arms.

Suspension usually means heavy, fragile and complicated with many moving parts. We developed a system with just one moving part coupled by two urethane bushings that serve as both spring and damper.

Like the rear suspension of a motorcycle the Mach One utilises a single swing arm for each truck. Moving in the vertical axis but fixed in yaw and roll, steering is unaffected and very direct.

The first swing arm suspension system on an electric skateboard.

An experience like no other.

A rigid deck cushioned by suspension rides like nothing else. Concave and drop locks you in place, suspension soaks up vibration keeping you glued to the road. Immense torsional stiffness provides incredible stability and confidence at any speed.

Easily adjustable.

It's as easy to adjust as your truck bushings. A simple skate T-tool is all that’s needed to make quick pre-load adjustments to both suspension and steering bushings.

F1 derived monocoque chassis.

Like a Formula 1 car the Mach One uses a load bearing carbon fibre tub bolted directly to the suspension, saving weight and enabling tight packaging.

Hollow Kevlar composite deck.

Two Kevlar composite parts laminated with a urethane edge form the Mach One’s hollow 10” deck weighing in at just 1kg.

Swappable deck system.

The Mach One’s deck is a top cover that’s easily removed with eight screws, allowing easy access to internals. Upgrade your deck when newer models & graphics become available, or have custom setups you can swap out in an instant.

Single pivot suspension swing arms.

Suspension usually means heavy, fragile and complicated with many moving parts. We developed a system with just one moving part coupled by two urethane bushings that serve as both spring and damper.

Like the rear suspension of a motorcycle the Mach One utilises a single swing arm for each truck. Moving in the vertical axis but fixed in yaw and roll, steering is unaffected and very direct.

The first swing arm suspension system on an electric skateboard.

An experience like no other.

A rigid deck cushioned by suspension rides like nothing else. Concave and drop locks you in place, suspension soaks up vibration keeping you glued to the road. Immense torsional stiffness provides incredible stability and confidence at any speed.

Easily adjustable.

It's as easy to adjust as your truck bushings. A simple skate T-tool is all that’s needed to make quick pre-load adjustments to both suspension and steering bushings.

Introducing the Radium Torque Steering System.

The world's first torque vectoring system on an electric skateboard.

Better Handling.

The RTS system independently controls each motor using them to steer the rear truck the same way oars steer a kayak by pushing or pulling. Essentially power steering, this leads to increased responsiveness and agility.

Increased traction.

By providing more power/braking to the wheel with most of the weight over it in a turn, RTS increases traction allowing you to power out of corners earlier.

Customize your board setup with the mobile app.

RTS comes with a multitude of settings and riding modes that can be adjusted on the fly using the Mach One app. Change the way your board handles with the tap of a button.

Introducing the Radium Torque Steering System.

The world's first torque vectoring system on an electric skateboard.

Better Handling.

The RTS system independently controls each motor using them to steer the rear truck the same way oars steer a kayak by pushing or pulling. Essentially power steering, this leads to increased responsiveness and agility.

Increased traction.

By providing more power/braking to the wheel with most of the weight over it in a turn, RTS increases traction allowing you to power out of corners earlier.

Customize your board setup with the mobile app.

RTS comes with a multitude of settings and riding modes that can be adjusted on the fly using the Mach One app. Change the way your board handles with the tap of a button.

Advanced trucks.

Built upon modern downhill skate technology and developed over six radically innovative truck designs, the R6 are hard to beat.

Split angle geometry.

A rear steer of 30 degrees makes the R6 super stable, while twice as much steering comes from the 60-degree front which is the lightest side of the board. Coupled with narrow 237mm hangars this makes for ultra-responsive handling, making the board feel like an extension of your body.

Offset bushings.

A unique offset bushing system with two kingpins provides significantly improved stability and feel throughout a corner. Combined with Riptide bushings it’s a big part of what makes the R6 feel rock solid at speed.

High tolerances.

Custom pivot tubes, super rigid 11mm hardened kingpins, anti-slop set screws, precision bushing washers and tightly machined tolerances throughout – we went above and beyond to achieve the ultimate precision feel.

Advanced trucks.

Built upon modern downhill skate technology and developed over six radically innovative truck designs, the R6 are hard to beat.

Split angle geometry.

A rear steer of 30 degrees makes the R6 super stable, while twice as much steering comes from the 60-degree front which is the lightest side of the board. Coupled with narrow 237mm hangars this makes for ultra-responsive handling, making the board feel like an extension of your body.

Offset bushings.

A unique offset bushing system with two kingpins provides significantly improved stability and feel throughout a corner. Combined with Riptide bushings it’s a big part of what makes R6 trucks feel rock solid at speed.

High tolerances.

Custom pivot tubes, super rigid 11mm hardened kingpins, anti-slop set screws, precision bushing washers and tightly machined tolerances throughout – we went above and beyond to achieve the ultimate precision feel.

Airless rubber wheels.

Rubber compound in urethane format, the Radium SR125 wheels provide direct handling with great road feedback yet absorb impacts and keep you glued to the ground in all conditions.

Thanks to a big supportive core and refined lip profile they turn tighter and provide more high-speed stability than any other eskate wheel.

Airless rubber wheels.

Rubber compound in urethane format, the Radium SR125 wheels provide direct handling with great road feedback yet absorb impacts and keep you glued to the ground in all conditions.

Thanks to a big supportive core and refined lip profile they turn tighter and provide more high-speed stability than any other eskate wheel.

Poly-urethane drive belts.

We were sick of breaking belts, so we tried everything to avoid the compromises of a gear drive.

Urethane belts were the answer.

More direct throttle response, significantly higher abrasion resistance and unbreakable steel cords make these the toughest eskate belts.

Poly-urethane drive belts.

We were sick of breaking belts, so we tried everything to avoid the compromises of a gear drive.

Urethane belts were the answer.

More direct throttle response, significantly higher abrasion resistance and unbreakable steel cords make these the toughest eskate belts.

Motors developed for the Mach One.

After hundreds of hours of R&D, these are the most durable eskate motors, period.

Operating at 150A each and propelling the Mach One to 30mph in under three seconds, they boast impressive power density but run efficient and cool thanks to a built-in centrifugal fan.

The majority of our design efforts were on durability, with quad NMB bearings, 2.5mm thick steel cans and highly refined construction the Radium 6485 motors outlast everything else.

Motors developed for the Mach One.

After hundreds of hours of R&D, these are the most durable eskate motors, period.

Operating at 150A each and propelling the Mach One to 30mph in under three seconds, they boast impressive power density but run efficient and cool thanks to a built-in centrifugal fan.

The majority of our design efforts were on durability, with quad NMB bearings, 2.5mm thick steel cans and highly refined construction the Radium 6485 motors outlast everything else.

Compact fast charging.

Rider further without range anxiety.

The Radium charger weighs just 1kg and easily fits in a small backpack.

Using resonant LLC technology this tiny charger puts out an impressive 12 Amps, charging the Mach One to 90% in under 2 hours.

Compact fast charging.

Ride further without range anxiety.

The Radium charger weighs just 1kg and easily fits in a small backpack.

Using resonant LLC technology this tiny charger puts out an impressive 12Amps, charging the Mach One to 90% in under two hours.

Support & maintenance.

At Radium Performance we don’t just sell electric skateboards – we forge lasting partnerships with our customers. Our commitment extends far beyond initial purchase.

We recognize that your board isn't just a mode of transportation, it's a trusted companion on your adventures, a reliable tool for your daily commute, and an essential part of your lifestyle. That's why we're dedicated to providing ongoing support and maintenance to ensure your ride remains smooth and trouble-free.

Our team of passionate skaters and expert technicians is committed to keeping your board in top condition, from routine tune-ups to unexpected repairs. With a growing number of service centres around the globe, we'll address any issues promptly and efficiently, so you can get back on the road with confidence.

Support & maintenance.

At Radium Performance we don’t just sell electric skateboards – we forge lasting partnerships with our customers. Our commitment extends far beyond initial purchase.

We recognize that your board isn't just a mode of transportation, it's a trusted companion on your adventures, a reliable tool for your daily commute, and an essential part of your lifestyle. That's why we're dedicated to providing ongoing support and maintenance to ensure your ride remains smooth and trouble-free.

Our team of passionate skaters and expert technicians is committed to keeping your board in top condition, from routine tune-ups to unexpected repairs. With a growing number of service centres around the globe, we'll address any issues promptly and efficiently, so you can get back on the road with confidence.