Home / Customer Gallery
Race build by Jeff Cameron
- Radium 205kv 6485 motors on rear (delivering 135A per motor)
- Radium 6355s on front (delivering 75A per motor).
- Radium motor adaptors
- Stooge Race Boards 3-links and SRB open gear drives 18/67 ratio
- 150mm BRP racing slicks and SRB hubs.
- Semendeed prototype deck and enclosure by Glyphiks
- Molicel p42a 12s8p single stack battery by Glyphiks
- MakerX DV6 pro in rear, standard DV6 in front.
- Core Mountainboarding custom esc enclosures with lid scoops for airflow.
- Raijin Racing custom griptape
- MBS front binding
- Top speed 65km/h and roughly 4secs to get there!
- Currently holding top spot on 3-lap Global T-Race challenge as of writing this.
Build by Michael Scollo (ZFG Esk8)
- Deck - ZFG Lucky
- Trucks 420 Matrix iii (Grey)
- MBS Rockstar Wheels
- MBS F5 Bindings
- Tires MBS T3
- Tube 8 Inch
- Bearings 12X28mm
- Grip Tape Pads and Riser Pads
- Radium 6485 173KV Motors
- Hoyt Puck
- Radium Wheel Pulley 78 Tooth
- Radium Motor Pulley 16 Tooth
- Radium Motor Mounts
- Maker X DV6 Pro ESC
- ESC Enclosure
- Pelican Case Battery Enclosure
- Misc Materials
- Charger 4 AMP
- Battery 12S4P Molicel P42A
Build by Orkaan Söl‘ring
- 20S5P P42A
- Spinted Ubox
- 6485 138kv - Radium motors
- Gearing 18/78 - Radium pulleys and 20mm belts
- Radium Motor Mounts Gen 3 with brace
- Upgraded Matrix II with Radium Riptide Adapters and bearings as a kingpin
- Davega
- Moon Eros rims
Build by Sam Jackson
- Top speed 65 km/h
- Radium 6485 245kv motors
- 16/78T Radium pulleys
- Gen 3 Radium motor mounts
- 13S8P 21700 battery
- Boundmotor Octopus deck/enclosure
- BN 270 trucks
- Makerx D75 ESC
- Newbee Impaler hubs
- Sunmate 7in & Meepo Cyclone 165mm tyres
- Hoyt puck remote with custom postmote shell
- Powell Peralta grip tape
- Radium anti-sink plate (gunmetal)
- Radium power button
