We always wonder how other skate brands started out. Its normally not well documented, so we decided to share our...
Building an electric skateboard with a rigid deck and enclosure that still provides a smooth ride can be tackled in...
In the third part of this blog series we go in-depth into composite layup and mould making. This was such...
In the previous blog post we went through our attempts at making molds to prototype the carbon fiber Radium board...
In the previous parts of this blog series we went through making the molds, and by this point we had...
In the last update we made the carbon fiber parts of our prototype electric skateboard, but we cant test it...
