Motor 6485 - LACROIX 10mm shaft version
$330.00
$349.00
Pickup currently unavailable
Modified to have identical shaft and mounting pattern as the stock Lacroix 6389 motors.
These motors have a 10mm diameter shaft, 33.7mm length, with a keyway and two circlip grooves to retain a pulley without the need for grub screws.
For Stormcore 60D we suggest 173kv to maximize torque. This will reduce top speed by aprox. 10% over the stock 190kv motors with the same gear ratio. For aftermarket ESC's such as Makerx DV6s 205kv is recommended.
For 18S Supersport models the 138kv will provide a top speed approx 5% higher than the stock 6389 motors.
Current stock comes with:
- 205kv - 5.5mm Amass bullets to suit Makerx ESC's
- 173kv - 5.5mm Amass bullets to suit Makerx ESC's
- 138kv - 4mm Amass bullets to suit Stormcore
Features:
-High efficiency - typically increases range by 10-20%
-High power density - punches above its weight
-Long lifespan - replaceable quad high load NMB bearings
-Active cooling - built in fan reduces running temps
-Front mounted sensor system - never skips a beat
Specs:
-5500W
-64mm diameter, 85mm length
-10mm shaft, 33.7mm length with keyway and circlip grooves
-High quality enamel windings rated to 220C
-Curved N45SH magnets rated to 150C
-Battle hardened with high quality epoxy
-Sensored with 2mm JST plug for VESC. 12awg phase wires with 4mm/5.5mm AMASS bullets
-44 and 30mm mounting pattern
-100C maximum operating temperature (recommend adjusting vesc settings to 100C start, 115C end for temperature cutoff otherwise motors will not reach 100C).
-Weight: 1.1kg
-Includes: 1x motor, 2x pulley circlips, 4x M4 steel mounting screws