In stock. Limited supply available. 

Modified to have identical shaft and mounting pattern as the stock Lacroix 6389 motors. Comes with 4mm bullets to fit Stormcore.

These motors have a 10mm diameter shaft, 33.7mm length, with a keyway and two circlip grooves to retain a pulley without the need for grub screws.

For 12S boards we opted for 173kv instead of 205kv to maximize torque from the limited current output of the Stormcore 60D. This will reduce top speed by aprox. 10% over the stock 190kv motors so we suggest adjusting gearing accordingly or message us about 205kv.

For 18S Supersport models the 138kv will provide a top speed approx 5% higher than the stock 6389 motors.

NOTE - The stock Lacroix screws are too long and will damage these motors. Shorter M4 x 8mm steel screws are included, but Titanium screws can be purchased here.

Features:

-High efficiency - typically increases range by 10-20%

-High power density - punches above its weight

-Long lifespan - replaceable quad high load NMB bearings

-Active cooling - built in fan lowers running temps

-Front mounted sensor system - never skips a beat

Specs:

-5500W

-64mm diameter, 85mm length

-10mm shaft, 33.7mm length with keyway and circlip grooves

-High quality enamel windings rated to 220C

-Curved N45SH magnets rated to 150C

-Battle hardened with high quality epoxy

-Sensored with 2mm JST plug for VESC. 12awg phase wires with 4mm AMASS bullets

-44 and 30mm mounting pattern

-100C maximum operating temperature (recommend adjusting vesc settings to 100C start, 115C end for temperature cutoff otherwise motors will not reach 100C).

-Weight: 1.1kg

-Includes: 1x motor, 2x pulley circlips, 4x M4 steel mounting screws

12 month warranty on manufacturing defects